RayClic Connection System

The Rayclic connection system cuts installation time by 80%. Inserting the stripped cable into the module and tightening two screws is all it takes. Suitable for used with hot water temperature maintenance products HWAT-M, HWAT-R and frost protection products FS-A-2X, FS-B-2X and GM-2X heating cables.

Power Connections

Rayclic-CE-02

235422-000

Image of Rayclic-CE-02

Cold applied power connection with 1.5m power cable. Includes end seal and support bracket. IP68 weather protection.

Rayclic-PS-02

716976-000

Image of RAYCLIC-PS-02

Cold applied powered splice with 1.5m power cable. This allows the connection of 2 heating cables. Includes 2 end seals and 1 support bracket. IP68 weather protection.

Rayclic-PT-02

636284-000

Image of RAYCLIC-PT-02

Cold applied powered T-connection with 1.5m power cable. Allows the connection of 3 heating cables. Includes 3 end seals and 1 support bracket. IP68 weather protection.

Connections

Rayclic-S-02

364855-000

Image of Rayclic-S-02

Splice for connection of 2 heating cables when the integral power connection is not required. Includes 1 support bracket and is IP68 weather protected.

Rayclic-T-02

441524-000

Image of RAYCLIC-T-02

T-connection for connection of 3 heating cables when the integral power connection is not required. Includes 1 end seal and 1 support bracket and is IP68 weather protected.

Rayclic-X-02

001013-000

Image of RAYCLIC-X-02

4 way connection for connection of 4 heating cables when the integral power connection is not required. Includes 2 end seals and 1 support bracket and is IP68 weather protected.

Additional End Seals

Rayclic-E-02

224727-000

Image of Rayclic-E-02

Spare cold applied gel-filled end seal for system extensions. IP68 weather protection.

Support Bracket

Rayclic-SB-02

852001-000

Image of Rayclic-SB-02

Support bracket for mounting RAYCLIC connections to a wall.