Fixings (adhesives, tapes, straps) for Raychem Products from KSM Limited

Fixings for Raychem Products

Attachment Tapes

GT-66

Part Number: C77220-000

The Raychem GT-66 is a 20m roll of glass cloth adhesive tape for attaching heating cable to metal pipes.

Not for stainless-steel pipes or for installation temperatures below 4.4°C.

20m per roll, 12mm width.

GS-54

Part Number: C77221-000

Glass cloth adhesive tape for attaching heating cable to stainless steel pipes.

For stainless steel pipes or for any installation below 4.4°C.

16m per roll, 12mm width.

ATE-180

Part Number: 846243-000

Aluminium adhesive tape for attaching heating cables and thermostat sensors to pipes and tanks.

Minimum installation temperature: 0°C.

50m per roll, 63.5mm width

Warning Labels

LAB-I-01

Part Number: 938947-000

Warning labels indicate the presence of electrical heat-tracing under the insulation of the pipe or other equipment. Labels should be spaced at no less than 5 metres apart on the insulation surface.

Pipe Fixings

Pipe Straps (Metal)

Metal straps for pipe mounting of integrated power connections, above the insulation tees and end seals as well as support brackets and the tubular insulation entry.

Banding: stainless steel

Pipe Outer Diameter Range	Product Code	Raychem Part Number	Weight
20-47mm (0.5" - 1.25")	PSE-047	700333-000	0.017 kg
40-90mm (1.25" - 3")	PSE-090	976935-000	0.024 kg
60-288mm (2" - 10")	PSE-280	664775-000	0.052 kg
60-540mm (2" - 20")	PSE-540	364489-000	0.052 kg

KBL-10

Part Number: 102823-000

Temperature and UV resistant cable tie for attaching trace heating cable to a pipe.

One pack of 100 ties will cover approximately 30 metres of cable. Length: 370mm

Spacers

EM-SPACER

The Raychem EM-Spacer range provides a fixing and spacing solution for all ramp heating and surface snow melting cables including:

Mineral-Insulated (MI) snow melting kits
Polymeric constant wattage (EM4-CW) snow melting kits
ViaGard EM2-XR Self-regulating snow melting cables and configured units.
ViaGard EM2-R self regulating snow melting cables for light commercial and residential applications.

Product	Description	Raychem Part Number
VIA-SPACER-10m	Metal heater cable spacer, 10m length (recommended for EM-MI-PACK)	198398-000
VIA-SPACER-25m	Metal heater cable spacer, 25m length (recommended for EM-MI-PACK)	893869-000
EM-SPACER-PL	Plastic heater cable spacer, 5m length, 25mm clip spacing	1244-005177

Gutter Snow Melting Fixings

GM-RAKE

Part Number: 912791-000

The Raychem GM-RAKE Hanger Bracket is used with Raychem IceStop heating cables. It provides mechanical protection of the cable as it goes over sharp edges and holds it in place at the top of drainpipe.

Fixing bracket/edge protection for drainpipes
Spacer for use in wide channels or gutters where more than one run of cable is required (a spacer is placed every 100 cm)
VA steel with UV-resistant cable ties KBL-9

IceStop-GMK-RC

Part Number: 153651-000

Roof clip to secure heating cables to roofs and gutters.

Adhesive can be applied on the underside of the roof clip. After curing of the adhesive the heating cable can be clipped between the clamps.

Packs of 50

GM-SEAL-02

Part Number: 1244-012310

Adhesive for sticking and sealing common construction materials with a base of polyurethane perfectly suitable for metal or plastic gutters, roofing tiles and even asphalt and bitumen surfaces.

Comes in a 300ml pack.

GM-CLIP-L

Part Number: 1244-013851

Smart clip for fast and reliable installation of heating cables GM-2X, GM-2XT and FroStop Black in L-shaped gutters.